Alpha-2-Plasmin Inhibitor (a2PI) Antibody Pair abx370735 上海玉博生物科技有限公司

Alpha-2-Plasmin Inhibitor (a2PI) Antibody Pair

如果您对该产品感兴趣的话，可以
产品名称：Alpha-2-Plasmin Inhibitor (a2PI) Antibody Pair
产品型号：abx370735
产品展商：abbexa
产品文档：无相关文档

简单介绍

Alpha-2-Plasmin Inhibitor (a2PI) Antibody Pair

产品描述

Alpha-2-Plasmin Inhibitor (a2PI) Antibody Pair for use in Sandwich ELISA assay development. This antibody pair contains:

Component	5 × 96 tests	10 × 96 tests
Capture Antibody	200 µg	400 µg
Biotin-Conjugated Detection Antibody	50 µg	100 µg
Standard	2 µg	10 µg

Please note that quantities and concentrations may change between different batches.

It is recommended to use this antibody pair with abx098958 Antibody Pair Support Kit (Sandwich Method).

Target	Alpha-2-Plasmin Inhibitor (a2PI)
Reactivity	Mouse
Tested Applications	ELISA
Recommended dilutions	Dilute the Capture Antibody 125-fold with Coating Buffer. Dilute the Biotin-Conjugated Detection Antibody 200-fold with Detection Antibody Diluent. Optimal dilutions/concentrations should be determined by the end user.
Form	Liquid (Capture Antibody and Detection Antibody)
Reconstitution	Reconstitute the standard with Standard Diluent. The volume, and therefore standard concentration, should be determined by the end user.
Storage	Aliquot and store at -20°C. Avoid repeated freeze/thaw cycles.
Buffer	The Capture and Detection Antibody both contain 0.1% sodium azide.
Standard Form	Lyophilized
Assay Type	Sandwich
Capture Antibody Conjugation	Unconjugated
Detection Antibody Conjugation	Biotin
Concentration	Capture Antibody: 0.5 mg/ml Biotin-Conjugated Detection Antibody: 0.2 mg/ml
Availability	Please enquire.
Note	This product is for research use only.
Directions for use	Bring all components to room temperature (18-25°C) and briefly spin or centrifuge the vials before use. Working solutions should be prepared and used immediately. Recommended Procedure: Dilute the Capture Antibody to working concentration using Coating Buffer. Immediately coat the 96-well plate with diluted Capture Antibody (100 µl per well). Seal the plate and incubate at 4 °C overnight or at 37 °C for 2 hours Aspirate the wells and wash with Wash Buffer (350 µl per well) and allow to soak for 1-2 min. Remove the liquid by inverting and tapping the plate on to absorbent paper. Block the plate with Blocking Buffer (200 µl per well) at 37 °C for 1.5 hours. Repeat the aspiration/wash process in Step 2. Add 100 µl of standards or sample into the appropriate wells. Cover with a plate sealer and incubate at 37 °C for 1 hour. Repeat the aspiration/wash process in Step 2. Add appropriately diluted Biotin-Conjugated Detection Antibody (100 µl per well). Cover the plate with a new plate sealer and incubate at 37 °C for 1 hour. Repeat the aspiration/wash process in Step 2. Add appropriately diluted Streptavidin HRP (100 µl per well). Cover the plate with a new plate sealer and incubate at 37 °C for 30 min. Repeat the aspiration/wash process in Step 2. Add Substrate Solution (90 µl per well). Cover the plate with a new plate sealer and incubate at 37 °C for 10-20 min. Keep the plate in the dark and avoid exposure to light. Add Stop Solution (50 µl per well). Tap the side of the plate to ensure thorough mixing. Measure the absorbance immediately using a microplate reader set at 450 nm.

Research Articles on Alpha-2-Plasmin Inhibitor (a2PI)

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报

产品目录

产品资料

Alpha-2-Plasmin Inhibitor (a2PI) Antibody Pair