扭力测试仪 CD-100M CD-10M

点击查看大图

产品价格： < 面议

产品型号：CD-100M CD-10M

品牌：日本杉崎 CEDAR

公司名称：苏州仪器网

所在地：江苏苏州

浏览次数：3211 次

立即询价在线咨询

腾讯QQ
MSN

产品简介

CD－100M  CD－10M 电批扭力测试仪是CEDAR品牌的产品，是大陆地区主力销售机型，具有自动复位功能，可进行数据存储，USB接口能方便与电脑连接进行数据输出，基本测试精度为0.5%，可用于电动螺丝刀（电批），扭矩起子，扭矩螺丝刀的校准。产品性能可靠。此款产品不可用于气动，冲击式的工具之扭矩校准。 CD-100M  CD-10M，CEDAR电动螺丝刀扭力测试仪

产品详细信息

性能特点

(1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display.

(2) 单位 N-m <=> kgf-cm <=>lbf-in Etc.

(3) Setup of Various Numerical Values Can be Easy and Can Carry Out Speedily.

(4) *大值、*小值、平均值计算

(5) 数据存储方便，智能化数据输出

(6) 过载保护，具有指示灯

(7) USB接口输出(B Type).

(8) 800数据存储

(9) 实时输出每秒180次

技术规格： CEDAR 螺丝刀扭力测试仪

Specification	CD-100M	CD-10M
Measuring range (at the time of Track)	0.10～10　N・m	1.0～100　cN・m
	1.0～100 kgf・cm	0.10～10 kgf・cm
	1.0～90 lbf・in	0.10～9 lbf・in
基本精度	±0.5％（F/S）(199 or less digit±1digit)
显示	3.5位数字显示LCD
双方向	CW-CCW (right and left)
测试模式	Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)
上下限设置	High and low value are measurement within the limits, and can be set up.
实时输出	Load torque value is outputted every about1/ 180 second.
*大值小值均值	The maximum, the minimum, average value, and the data number of 30 data are displayed.It saves to ten channels.
自动复位设定	Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
一键复位	A clear button is pushed and it is a zero.　 Data is outputed.
Data output	ASCII format (baud rate 19200)
电源	Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save	10 minutes no use, automatically switch off.
Charging time	About 3 hours
Continunous working time	About 12 hours
Socket fit mouth	□ 20mm/ □9.5mm
Weight	Abbreviation 1 kg
Outside dimension	160（W）×125（D）×55（H）
测试头	Measurement joint　SJ50/SJ10K	Measurement joint　SJ10
Accessories (one piece each)	AC/DC adaptor
	Exclusive receipt case
	An inspection report, a proofreading certificate, traceability system figure