Yokogawa Distributed Control Systems DCS Analog Input Module AAV141-S50 AAV141-S50

点击查看大图

产品价格： < 面议

产品型号：AAV141-S50

品牌：Yokogawa

公司名称：GUANGZHOU TAIKE ELECTRON TECHNOLOGY CO.,LTD.

所在地：广东广州

浏览次数：1249 次

立即询价在线咨询

腾讯QQ
MSN

产品简介

Yokogawa Distributed Control Systems DCS Analog Input Module AAV141-S50, Yokogawa Distributed Control Systems DCS Analog Input Module AAV141-S50. Please contact us: tekrachel @ 163.com

产品详细信息

Manufacturer: Yokogawa Electric Corporation

Yokogawa Distributed Control Systems DCS Analog Input Module AAV141-S50

STANDARD SPECIFICATIONS

Current/Voltage Input Modules (Non-Isolated)

Yokogawa Distributed Control Systems DCS Analog Input Module AAV141-S50

These modules mainly receive 4 to 20 mA DC or 1 to 5 V DC standardized signal from 2-wire/4-wire transmitters.

They can be used in dual redundant configuration.

Items		Specifications
Model		*AAI141 (1)**	AAV141	AAV142
Number of input channels		16, non-isolated	16, non-isolated(differential input)	16, non-isolated
Input signal		4 to 20 mA DC	1 to 5 V DC(allowable common mode voltage ± 1 V or less)	-10 to 10 V DC
Allowable input current/voltage		27 mA	±7.5 V	±13 V
Withstanding voltage		—	—	—
Input resistance	Power ON	400 Ω (at 20 mA) to 1000 Ω(at 4 mA) (*2)	1 MΩ or more	1 MΩ or more
	Power OFF	500 kΩ or more	340 kΩ or more	660 kΩ or more
Accuracy		±16 μA	±4 mV	±20 mV
Data update period		10 ms
Step response time		100 ms
Transmitter power supply		14.8 V or more (at 20 mA) (*3)26.4 V or less (at 0 mA)(output current limit: 27 mA)	—	—
Setting of 2-wire or 4-wire transmitter		For each channel by setting pin	—	—
Drift due to ambient temperature change		±16 μA/10 °C	±4 mV/10 °C	±20 mV/10 °C
Maximum current consumption		310 mA (5 V DC),450 mA (24 V DC)	350 mA (5 V DC)	350 mA (5 V DC)
Weight		0.2 kg	0.2 kg	0.2 kg
External connection		Pressure clamp terminal, KS cable, MIL connector cable
HART communication (*4)		Available	—	—

*1: This AAV141 does not allow a Zener barrier to be connected. If the module AAV141 is to be used in intrinsically safe applications, use an isolation barrier.

*2: Viewed from the terminals, module input resistance is, depending on the current flowing:

250 Ω +(voltage drop (3 V maximum) in the input protection circuit)/(current value)

*3: This voltage is developed between connecting terminals for this module’s 2-wire transmitter. When calculating if transmitter minimum operating voltage requirement will be satisfied, remember to allow for voltage drop in external wiring.

*4: R3.02 or later version supports HART function. When installing the module AAV141 with HART function to a remote node, the firmware of EB401 must be Rev 2 or later.

For HART function specifications, refer to “HART Communication Package (for A□I□□□-H) (GS 33Q03L70-31E).”

Yokogawa Distributed Control Systems DCS Analog Input Module AAV141-S50

MODELS AND SUFFIX CODES

		Description
Model	AAV141	Analog Input Module (1 to 5 V, 16-channel, Non-Isolated)
Suffix Codes	-S	Standard type
	5	With no explosion protection
	E	With explosion protection
	0	Basic type
	3	With ISA Standard G3 option and temperature (-20 to 70 °C) option
Option Codes	/K4A00	With KS Cable Interface Adapter [Model: ATK4A-00]
	/A4S00	With Pressure Clamp Terminal Block for Analog [Model: ATA4S-00]
	/A4S10	With Pressure Clamp Terminal Block for Analog (surge absorber) [Model: ATA4S-10]
	/A4D00	With Dual Pressure Clamp Terminal Block for Analog [Model: ATA4D-00]
	/A4D10	With Dual Pressure Clamp Terminal Block for Analog (surge absorber) [Model: ATA4D-10]
	/CCC01	With Connector Cover for MIL Cable [Model: ACCC01]