压缩歪度试验仪参考标准：
1. GB/T 7759-1996 idt ISO 815:1999 硫化橡胶、热塑性橡胶常温、高温和低温下压缩长久变形测定
2. ASTM D 395-2008 橡胶性能的标准试验方法.压缩长久变形
3. JIS K 6262-2006 硫化或热塑性橡胶.在常温、高温或低温下的压缩长久变形测定规格参数
压缩歪度试验仪规格参数：
1. 橡胶试样规格：Ø28.68，D12.7mm
2. 发泡塑胶试样规格：L50×W50×D25mm
3. 主机尺寸：约W200×D120×H250mm
4. 主机重量：约11kg
※ 温度试验参考：70℃—22hr；100℃—70hr
压缩歪度试验仪英文介绍：
Compression And Deformation Tester
Model: SZ-6615
It′s
used especially to test the static compression for tuber. Place one standard
specimen between parallel flat plates, revolve then compress it a certain range
of percentage and then put into the oven under the specified temperature for a certain
time period then take it off cooling for 30 minutes to measure its thickness
for calculating its permanent deformation rate.
Compression Deformation Rate Formula:
(Uncompressed Thickness - Compressed Thickness)÷(Uncompressed Thickness - Plate
Thickness)×100
Ⅰ Test Standard:
1. GB/T 7759-1996 idt ISO 815:1999 硫化橡胶、热塑性橡胶常温、高温和低温下压缩长久变形测定
2. ASTM D 395-2008 橡胶性能的标准试验方法.压缩长久变形
3. JIS K 6262-2006 硫化或热塑性橡胶.在常温、高温或低温下的压缩长久变形测定规格参数
Ⅱ Specifications:
1. Model: SZ-6615
2. Rubber Specimen: Ø28.68, D12.7mm
3. Foam Plastic Specimen: L50×W50×D25mm
4. Dimension: W200×D120×H250mm
5. Weight:11kg
6. Temp. Test Reference:70℃—22hr,100℃—70hr