Manufacturer: Yokogawa Electric Corporation Yokogawa Temperature Transmitter YTA50-A
Manufacturer: Yokogawa Electric Corporation
Yokogawa Temperature Transmitter YTA50-A
The Yokogawa Temperature Transmitter YTA50-A is a head mount type of temperature transmitter that accepts thermocouple, RTD, ohm, or DC milivolt input and converts it to a 4 to 20mA DC signal for transmission. The Yokogawa Temperature Transmitter YTA50-A conforms to the standard DIN formB head mounting.
Specifications:
Accuracy (typical)
YTA50: ±0.1% of span or ±0.2deg C(0.36deg F) YTA70: ±0.1% of span or ±0.1deg C(0.18deg F)
Cold junction Compensation accuracy
(For T/C only) ±1 deg C (1.8 deg F)
Power supply effect
±0.005% of FS per volt
Ambient temperature effect
YTA50: (±0.1% or ±0.1deg C) / 10 deg C YTA70: (±0.05% or ±0.05deg C) / 10 deg C
Input signal
Single input Input type is selectable: thermocouples, 2-, 3-, and 4-wire RTDs, ohm and DC milivolt
Output
Two wire 4 to 20 mA DC
Supply voltage
7 to 35 V DC (7 to 28 V DC for Intrinsically safe type)
Ambient temperature
Option code may affect limits -40 to 85 deg C (-40 to 185 deg F)
Mounting
DIN form B head mounting
Weight
50g (0.11lb)
Certificates
ATEX, FM, or IECEx
MODEL AND SUFFIX CODES
Model
Suffix code
Descriptions
YTA50
• • • • • • • • • •
Temperature Transmitter (Head Mount Type)
Output Signal
- A • • • • • •
4 to 20mA DC
Optional
Specifications
/ KS2
CENELEC ATEX (KEMA) Intrinsically safe approval
Applicable standard: EN 60079-0: 2006, EN 60079-11: 2007, EN 60079-26: 2007, EN 61241-0: 2006, EN 61241-11: 2006
Certificate: KEMA 06 ATEX0191
II1G Ex ia IIC T4 or T6, II1D Ex iaD
Amb. temp. for gas-proof T4: -40 to 850C (-40 to 1850F), T6: -40 to 600C (-40 to 1400F)
Surface temp. for dust-proof:
T4: T1050C amb. temp. -40 to 850C (-40 to 1850F)
T6: T850C amb. temp. -40 to 600C (-40 to 1400F)
Supply/output circuit: Ui=30V, Ii=120mA, Pi=0.84W, Ci=1nF, Li=10μH
Sensor circuit: Uo=9.6V, Io=25mA, Po=60mW, Co=2.4μF, Lo=33mH
/ DS2
FM intrinsically safe/Nonincendive and CENELEC ATEX intrinsically safe approval combination
(For CENELEC ATEX Intrinsically safe approval, see /KS2) [FM Intrinsically safe/Nonincendive approval]
Applicable standard: FM 3600, FM 3610, FM 3611, FM 3810
Intrinsically safe for Class I, Division 1, Groups A, B, C, and D
Supply : Vmax=28V, Imax=120mA, Pmax=0.84W, Ci三1nF, Li三10μH
Nonincendive for Class I, Division 2, Groups A, B, C, D Hazardous (Classified) indoor/outdoor (TYPE 4) Locations
Supply: Vmax=35V, Imax=150mA, Ci=0μF, Li=10μH
Amb. temp.: T6 Ta=550C, T4 Ta=800C