德国压痕试验装置深圳代理商 PTL

点击查看大图

产品价格： ¥1.00

产品型号：PTL

品牌：德国PTL

公司名称：深圳市港为仪器有限公司

所在地：广东��圳

浏览次数：1211 次

立即询价在线咨询

腾讯QQ
MSN

产品简介

德国压痕试验装置深圳代理商；

PTL压痕装置用于插头的插脚绝缘套管和直径达20mm电线和电缆在200°C负载达11.5N的压力测试，根据IEC 60811-3-1 / 1985 + 表 May1986&8.1.3。 德国压痕试验装置深圳代理商假一赔十

产品详细信息

德国PTL压痕试验装置，进口压痕测试装置

PTL压痕装置用于插头的插脚绝缘套管和直径达20mm

电线和电缆在200°C负载达11.5N的压力测试，根据IEC 60811-3-1 / 1985 + 表 May 1986&8.1.3

和 & 8.2.3 图. 1, EN 60811-3-1 / 草稿 1994&8.1.3

and &8.2.3 图. 1, VDE 0473 811-3-1 部分/ 草稿 1995-01 & 8.1.3

and & 8.2.3图. 1

Standard outfit:

1 base plate, dimensions of the floor space 100 mm x 150 mm,

1 stand, with support, with plane sample bearing surface,

1 testing frame, mass including blade 25,5 g, exerted load 0,25 N,

1 straight blade, hardened and ground, 0,7 +0,01 mm thick, exchangeable,

1 load carrier, mass 25,5 g, for fitting the load weights, exerted load 0,25 N,

1 set of load weights, to load the sample with forces from 0,5 N to 11,5 N in steps of 0,01 N.

Design:base plate and small weight pieces of aluminum, all other parts of steel browned or nickel plated, bearing surface of the support ground, total height approx.

270 mm with sample diameter 20 mm, Article No.: T 13.10

alternative:

PTL Indentation Device 20

as above, but for simultaneous testing of 2 samples, with 2 testing frames, 2 load carriers and 2 sets of load weights, stand with bearing support T-shaped,

Article No.: T 13.20

Rounded blade with radius 6 mm according to IEC 60884-1 / 1994 Fig. 29:on request

PTL Indentation Devices as multiple devices for 3 or more samples: on request

PTL Indentation Devices according to DIN 72 551 Part 5&3.4.2 Fig. A.2: on request

PTL Low Temperature Ram Impact Test Apparatus 10

to determine the mechanical strength of insulated cords, cables, couplers, plug pin insulating sleeves and enclosures in the cold

according to IEC 60670-1 / 2002-12 &15.1 Fig. 8 1), IEC 60811-1-4 /

1985 + Corrigendum May1986+A1/1993-09 + A2 / 2001-07&8.5 Fig. 2, IEC 60884-1 / 2002-06&24.4 Fig. 27 (and &30.4 Fig. 42 1)), EN 60811-1-4 / 1995-04 + A2 / 2001 &8.5 Fig. 2,

VDE 0473 Part 811-1-4/2002-09 & 8.5 Fig.2, VDE 0620 Part 1/2002-01&24.4 Fig. 28 (and &30.4 Fig. 41 1)

for this, intermediate pieceΦ6 mm, Article No. T 16.41, is required