KINAX WT717角位变送器

如果您对该产品感兴趣的话，可以
产品名称：KINAX WT717角位变送器
产品型号：KINAX WT717
产品展商：其它品牌
产品文档：无相关文档

简单介绍

KINAX WT717角位变送器，利用无接触，电容传感系统测得轴的角位。测量输出为与测量值成正比的4-20mA独立于负载的直流信号 * 转角的测量范围：0...10 到 0...50 或 0...50 到 0...350° // * 通过0..1555的变速箱可**测量0-20° // * 测量输出（输出/供电电路）两线制连接（4-20 mA信号）。

产品描述

KINAX WT717角位变送器利用无接触，电容传感系统测得轴的角位。测量输出为与测量值成正比的4-20mA独立于负载的直流信号。

其坚固的外壳设计适用于工厂，造船厂，运输业，汽车制造厂和化工厂。

* 无机械触点电容传感系统/无磨损

* 测量范围，转动方向，输出特性，开关点和另外的附加功能均可通过PC机编程/简化设计，缩短供货期，减少库存量

* 转角的测量范围：0...10 到 0...50 或 0...50 到 0...350°

* 通过0..1555的变速箱可**测量0-20°

* 测量输出（输出/供电电路）两线制连接（4-20 mA信号）

* 可仿真测量并输出/便于安装调试阶段，对相关其它设备（系统）进行仿真测试

* 实时量的被测值和图示可以在屏幕上保持很长时间

* 机械位置以及模拟输出，零点和量程的调整可以自由编程组态设定

* 输出量特性：可编程设定为线性，V型曲线或任意的特性曲线

* 驱动轴可以无限制转��：即使超过量程的*大范围也不会产生磨损。

* 串行接口

* 轴上的容许静态负载：*大1000 N (径向)，*大 500 N (轴向)

* 外壳防护等级（IP67）：抗震动和冲击

Measuring transmitter with contactless, capacitive sensing system for acquiring the angular position of a shaft.

A load-indepent DC-signal with a range of 4 to 20 mA is read out from the measurement output. The robust housing has made this unit ideal for machines, ship building, transport, construction of vehicles and in the chemical industry.

Patented contactless capacitive system, wear-free

Measuring range, direction of rotation, characteristics, output changeover and other functions can be programmed via PC: facilitates planning and project work, short lead times, minimal inventory

Angle of rotation measuring range: 0°...10° to 0°...50° or 0°...50° to 0°...350°
With gearbox 0...20° to 0...1555 revolutions
Measurement output (measuring/supply circuit) utilizes 2-wire connection (4 to 20 mA signal)

Simulation of measured value allows to test subsequent control circuits, control loops or measuring circuits during installation

Display of present measurands and graphical representation on screen for longer time periods
Adjustment of mechanical position and fine adjustment of the analog output, zero point and span may be set independently

Programmable output characteristics: linear, V-characteristic or freely selectable linearization curve

Shaft can be turned through full, no damage occurs even if the upper limit value of the measuring range is exceeded

Serial interface

Permissible static load on the shaft: max. 1000 N (radial), max. 500 N (axial)

Surface mounting device in rugged housing (IP67): vibration and shock resistant

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报

产品目录

产品资料

KINAX WT717角位变送器