KINAX WT707角位变送器，利用无接触，电容传感系统测得转轴的角位。测量输出为独立负载的4－20mA直流信号。由于其坚固的设计可用于任何机械生产厂和造船厂。 * 无机械触点电容传感系统/无磨损 * 模拟测量方法，高分辨率 * 测量范围：0.. 5 到 0.. 270°；通过0..1600的变速箱可**测量0－10° * 测量输出：0.. 1 到0 / 4.. 20 mA / 2, 3或4线制连接 * 可选本安防爆型，符合EEx ia IIC T6，用在易爆场所 * 通过电位计精调/根据用户需求优化仪表的测量范围 * 输出量特性：线性或V型曲线 * 驱动轴可以无限制转动：即使超过量程的*大范围也不会产生磨损 * 外壳坚固：抗震动，适用于机械制造厂及造船厂 l GL认证/用于船舶上 Measuring transducer with contactless, capacitive sensing system for acquiring the angular position of a shaft. A load-independent DC signal with a range of 4 to 20 mA is read out at the measurement output. Due to its rugged design, it is used primarily in machinery manufacturing and shipbuilding. Patented contactless capacitive system / wear-free Analog measuring method, practically infinite resolution Angle of rotation measuring range: 0.. 5 to 0.. 270° without gearbox 0.. 10° through 0.. 1600 revolutions with gearbox Measurement output: 0.. 1 to 0/4.. 20 mA 2, 3 or 4-wire connection Available with "intrinsically safe" explosion protection per EEx ia IIC T6, can be used in explosive atmospheres Measuring span adjustment with potentiometer / optimized adaptation to desired measuring ranges Output quantity characteristics: linear or as a characteristic V curve Drive shaft can be infinitely rotated: no damage occurs even if the upper limit value of the measuring range is exceeded. Surface mounting device in rugged housing: vibration and shock resistant, suitable for use in machinery manufacturing and shipbuilding Available as GL variant (Germanischer Lloyd) / suitable for use on ocean-going vessels Article No. Meas. Range, Angle Variant Direction of Rotation Output Signal / Auxiliary Power 12 to 33 V DC 707-112DA150 0.. 30° Standard with base (mounted), metal rear panel, packing glands Clockwise 4.. 20 mA 2-wire connection or 0.. 20 mA 3-/4-wire connect. (selectable with potentiometer) 707-113DA150 0.. 60° 707-114DA150 0.. 90° 707-116DA150 0.. 270°
Measuring transducer with contactless, capacitive sensing system for acquiring the angular position of a shaft. A load-independent DC signal with a range of 4 to 20 mA is read out at the measurement output. Due to its rugged design, it is used primarily in machinery manufacturing and shipbuilding.