首页 >>> 产品目录 >>> 力传感器 >>> Himmelstein
仪表展览网 >>> 展馆展区 >>> 传感器/变送器 >>> 力学量传感器/变送器 >>> 美国Himmelstein扭矩传感器
> 美国Himmelstein扭矩传感器

产品资料

美国Himmelstein扭矩传感器

美国Himmelstein扭矩传感器
  • 如果您对该产品感兴趣的话,可以
  • 产品名称:美国Himmelstein扭矩传感器
  • 产品型号:79700v
  • 产品展商:Himmelstein
  • 产品文档:无相关文档
简单介绍
The MCRT® 79700V Series of Dual Range Digital Torque Transducers will accurately measure low running and high load torque without the cost and inconvenience of swapping two or more conventional torque
产品描述

MCRT® 79700V Series Dual Range Digital Torque Transducers
MCRT® 79700V

79700V_Series_Sft

 

The MCRT® 79700V Series of Dual Range Digital Torque Transducers will accurately measure low running and high load torque without the cost and inconvenience of swapping two or more conventional torque sensors. Another important application is measuring torque when the ratio of peak torque to average torque is high. In that situation, a conventional torquemeter must be oversized to avoid damage – a process which greatly reduces accuracy. Conditions that create high peak to average ratios include starting, stopping or reversing inertial loads, torsional oscillations, and diesel and single cylinder engine/compressor drives. Additionally, when peak torques are unknown, an MCRT® 79700V reduces the risk of damage from unexpected or accidental torque spikes.

These Dual Range Torquemeters have a LOW range that is 20% of its' HIGH range. Three simultaneous analog outputs can be individually set to 5 or 10 volts at each range full scale. Overrange is 150% to 300% and mechanical overload is 200% of the HIGH range and 1,000% of the LOW range. Digital output of torque, and speed and power with option Z, is available over the resident RS232 serial port. Included software interfaces with Windows based PC's for data display and collection as well as instrument setup.

Each range is calibrated in our accredited laboratory and documented by a NVLAP approved calibration certificate certifying NIST traceability and documenting our laboratory operation and our quality management system meets ISO/IEC 17025-2005. Temperature compensation and CW and CCW dead weight load calibrations are performed on each range.

General Specifications

  Low Range Performance High Range Performance

Combined Nonlinearity and Hysteresis (end point method, % of Range)

≤±0.10

≤±0.10

Nonrepeatability(% of Range)

≤±0.03

≤±0.025

Rotational Effect on Zero (% of Range)

≤±0.05

≤±0.03

Temperature Effects:

   

Zero (% of Range/deg. F.)

≤±0.0025

≤±0.001

Span (% of Rdg./deg. F.)

≤±0.0025

≤±0.001

Compensated Range

+75 to +175 deg. F.

Minimum Usable Range

-25 to +185 deg. F

Storage Range

-65 to +225 deg. F.

Analog Outputs:

 

 

Clockwise (CW)
Torque and Power (Option Z) (Volts)

+10 or +5, user selectable

Counterclockwise (CCW) Torque and Power (Option Z) (Volts)

-10 or -5, user selectable

CW & CCW Speed Output (Option Z) (Volts) +10 or +5, user selectable

Minimum Resistive Load

10 kΩ
Maximum Capacitive Load

0.05 μF

Constant Delay Signal Filters Field selectable from 0.1 to 200 Hz in eleven 1-2-5 steps using furnished software
Overrange³ (% of Range)

150 with ±10 volt outputs,
300 on ±5 volt outputs

System Response Torque is sampled at 2 kHz
Supply Voltage5 (Volts dc) 11 to 24 at 150 mA nominal
Power Supply Effect <0.002% of Range/volt
Remote Computer Control All functions can be controlled and/or selected via remote PC using furnishe d software.

 

产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!
  • 温馨提示:为规避购买风险,建议您在购买前务必确认供应商资质与产品质量。
  • 免责申明:以上内容为注册会员自行发布,若信息的真实性、合法性存在争议,平台将会监督协助处理,欢迎举报
产品留言
标题
内容
联系人
联系电话
电子邮件
公司名称
联系地址
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

鲁公网安备 37020202001236号