重庆内藤有售 SMC株式会社 压力开关 ZSE20 质量上乘

* 1 Select from 1.5 ms or less, 20 ms, 100 ms, 500 ms, 1000 ms, 2000 ms, or 5000 ms.

* 2 Further reduced by approx. 60% in power-saving mode (For 20 series)

● Visualization of Settings

The sub screen (label) shows the item to be set.

● Simple 3-Step Settings

When the S button is pressed and the set value (P_1) is being displayed, the set value (threshold value) can be set. 
When the S button is pressed and the hysteresis (H_1) is being displayed, the hysteresis value can be set.

● Now with a snap shot function for set value reading

● Easy Screen Switching　It is possible to change the settings while checking the measured value.

● 3 Setting Modes Select the setting mode that best meets your needs.

● Other Sub Screen Display
The peak value or bottom value, or both values can be displayed on one screen!

* Peak and bottom values are maintained even if the power supply is cut.

Connector type Wiring is possible after piping has been connected.

The bracket configuration allows for mounting in four orientations.

● Stainless diaphragm

Oil-free (Single-layer diaphragm structure) 
Sensor unit: Stainless steel 630　　Fitting parts: Stainless steel 304 
A stainless steel 316L option is also available for the sensor unit and fitting parts.

● Enclosure: IP65

● Leakage

1×10^-10Pa・m³/s 
<Face seal and compression fitting> 
1×10^-5Pa・m³/s 
<Threaded type (R, Rc, NPT, G)>

● Welded structure for sensor units and fitting parts

Select from a face seal or compression fitting.

● Applicable Fluid Examples