首页 >>> 产品目录 >>> 玻璃加工设备/玻璃车床
仪表展览网 >>> 展馆展区 >>> 玻璃**
> 玻璃**

产品资料

玻璃**

玻璃**
  • 如果您对该产品感兴趣的话,可以
  • 产品名称:玻璃**
  • 产品型号:148/10/100 WS WK
  • 产品展商:Arnold
  • 产品文档:无相关文档
简单介绍
148/10/100 WS WK 机器盒式喷灯-玻璃**,表面混合,水冷 为氢气和氧气 盒式喷灯总长:500mm, 盒式喷灯火焰宽度:100mm。10排喷嘴。该玻璃**优点:低噪音。稳定一致的火焰。极高的热容量。适合加工石英玻璃。 可用于石英扩管机和旋盘机上。
产品描述

德国ARNOLD提供**的148/10/100 WS WK  机器盒式喷灯-玻璃**,表面混合,水冷

为氢气和氧气

盒式喷灯玻璃**总长:500mm, 盒式喷灯火焰宽度:100mm10排喷嘴。

该玻璃**优点:低噪音。稳定一致的火焰。极高的热容量。适合加工石英玻璃。可用于石英扩管机和旋盘机上。
 

玻璃**技术信息Important information for this type of burner:

1.The connections of the media as well as the cooling water supply are shwon at the following layout.
供水冷和供气

  1.1  Especially at the gas connection it has to be regarded that there is a screwing with left-handed   thread in order to avoid any confusion. 
  The gas pipe – 12 mm diameter – also served as clamping for a burner holder.
          
螺纹**气管,  气管管径 -12mm,
1.2 
It is not permitted to operate the burner without water cooling.
  In order to guarantee the burner cooling, the water flow temperature should be around 20°C.
  If the flow temperature is less than 20°C there can be formed condensation water. 
  The outlet temperature of the water depends on the power (flame intensity) of the burner. But   it should never be mor than 50 °C. 
           玻璃**
必须要水冷, 水流温度约20°C。如果低于20°C,会产生冷凝水。出口水温取决于喷灯火焰强度。但不应超过50 °C

1.Flame width and flame adjustment
火焰宽度和调整
2.1  Due to the small long flame zone the burner can be used for joining processes as well as for   forming processes. The burner only has to be turned by 90 ° in the burner holder.
          
由于小而长的热区,喷灯可用于焊接和成型工作。喷灯要转90 °在喷灯支架。
2.2  At the flame adjustment it has to be regarded that the oxygen ratio is not too less. Thus the   flame is directly pulled into the burner nozzles. The highest flame temperature is then at this   area. This can lead to overheating and burning of the nozzles.

                    火焰调整氧气率不能太小。火焰会直接拉入喷嘴。高火焰温度在该地方。这导致过热,烧毁喷嘴

产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!
  • 温馨提示:为规避购买风险,建议您在购买前务必确认供应商资质与产品质量。
  • 免责申明:以上内容为注册会员自行发布,若信息的真实性、合法性存在争议,平台将会监督协助处理,欢迎举报
产品留言
标题
内容
联系人
联系电话
电子邮件
公司名称
联系地址
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!