|
Eagle MTS 180
In-Circuit Test System with Pneumatic Press
The Eagle enables inexpensive testing with
low-cost fixture solutions.
· Up to 3,456 pins at 5,500 N
· Economical fixture Solutions
· Pneumatic press
· One-Touch Fixture: Interface for fast exchange of fixtures
The Eagle MTS 180 is our most economical solution for
high-volume production. The in-circuit tester is equipped with a press, so
that you can dispense with expensive vacuum fixtures. The pneumatic press
allows you to develop even highly complex fixtures at minimal cost.
Our Eagle at 5500 N can
be equipped with up to 3456 analog and hybrid in-circuit test pins, making it
the ideal test system for EMS service providers and high-volume production.
In addition, the test system can be equipped with functional modules for greater fault coverage or configured as a function tester.
Features
|
Maximum no. of networks
|
3456
|
|
Maximum board size (mm)
|
430 x 310
|
|
Interface
|
Pneumatic press
|
|
System size (LxWxD)
|
1000 x 1700 x 860
|
|
Format
|
Pneumatic press, economical fixture solutions
|
|
Possible versions
|
analog, hybrid & Lambda edition
|
|
Maximum fixture pin number
|
3456 (at 5500 N)
|
|
|
Lambda edition: real parallel testing as the solution
Would you like to test multiple boards in parallel and save
time? We have the solution: real parallel testing with the Lambda edition.
With this technology you can test two or more assemblies at the same time,
thereby optimizing the cycle times and shortening the test time or performing
the tests using the shortest path. An ICT or functional test is performed by
two or more independent test heads, reducing the test time by the corresponding
factor. This applies to multi-panels as well as for multiple independent single
test objects.
The Lambda edition thus reduces the test time for two objects for example by 50 percent, or 75
percent for four, and so on.
Advantages of parallel testing
·
Optimizes cycle times
·
Small, economical test heads
·
Powerful, flexible software environment
·
Assemblies can be tested without additional effort
·
Low hardware costs
·
Takes up less space
Learn more about our
Lambda edition.
Boundary Scan ICT
With our boundary scan upgrade for In-Circuit Tests (ICT) you
can get the best of both testing methods worlds and achieve an optimal test
strategy with maximum test coverage and reduced overall costs.
Learn more
CAN-/LIN-Modules
The CAN-/LIN modules are standard interfaces for communication
with the test object.
Programmer Modules
With the Programmer Modules you can make specific selections for
onboard flash programming. Here we integrate for example programmers from
Ertec, SMH, ProMik or Algocraft.
IEEE-, RS232-, USB-Modules
These functional modules have standardized PC interfaces for
communicating with additional function
test modules.
PXI Devices
PXI devices serve as expansion modules for specific tests.
Optical Test Modules
The modules for optical tests can for example test LEDs, with
fiber optic cables used for testing the color and intensity of LEDs.
FIXTURE SPEC：
·
Fixtures can make double-sided contact
·
Fixtures can use rigid needles which are well suited for short
distances and small pads
·
Works with the compressed air fixture press
In order to avoid long waiting times for the construction of the
fixtures, Digitaltest offers an in-house fixture service.
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报