STACO 3PN1020 变压器STACO 171, STACO 252变压器

Variable Transformers
Series 100/200 l 0.8 to 3.0 Amperes
100/200 Series
These manually operated panel mounted units are available in
single and three phase models from 0.8 to 3.0 amperes. The
171, 201, 221-B and 291 units operate from 120 volt input,
while the 252 unit operates from a 240 volt input. STACO’s coil
tapping arrangement permits an output voltage from 0 to line
voltage in either the clockwise or counterclockwise direction
and from 0 to 10% above line voltage in the clockwise direction.
Two and three ganged, manually operated units are available
for increased single phase voltage ratings and for three
phase applications.
INPUT OUTPUT TERMINAL CONNECTIONS
CONSTANT CONSTANT SHAFT
(For increasing Voltage)
PART NO. WIRING VOLTS HERTZ VOLTS CURRENT IMPEDANCE ROTATION
As Viewed from Base End
SCHE- NET
LOAD LOAD FOR MATIC WT.
MAX MAX MAX MAX VOLTAGE Input Jumper• Output (Pg 8 & 9) LBS.
AMPS KVA AMPS KVA INCREASE
Single 120 50/60 0-120 1.75 0.21 2.2 0.26 CW 1-2 — 1-3
171 Phase CCW 1-2 — 2-3 1 2
60 0-132 1.75 0.23 – – CW 1-4 — 1-3
Single 50/60 0-240 1.75 0.42 2.2 0.53 CW 2-2 1-1 3-3
Phase 240 CCW 1-1 2-2 3-3 1&4 4 1/4
Series 60 0-264 1.75 0.46 – – CW 4-4 1-1 3-3
171-2 Three 50/60 0-120 1.75 0.36 2.2 0.46 CW 2-1-2 1-1 3-1-3
Phase 120++ — — CCW 1-2-1 2-2 3-2-3 1 & 5 4 1/4
Open
Delta π 60 0-132 1.75 0.40 — — CW 4-1-4 1-1 3-1-3
Three CW 2-2-2 1-1-1 3-3-3
171-3 Phase 240++ 60 0-240 1.75 0.73 2.2 0.92
CCW 1-1-1 2-2-2 3-3-3
1 & 6 6 1/2
Wye π
Single 50/60 0-120 2.0 0.24 2.5 0.30 CW 1-2 — 1-3
201 Phase 120 CCW 1-2 — 2-3 1 2
60 0-132 2.0 0.26 — — CW 1-4 — 1-3
Single 50/60 0-240 2.0 0.48 2.5 0.60 CW 2-2 1-1 3-3
Phase 240 CCW 1-1 2-2 3-3 1 & 4 4 1/4
Series 60 0-264 2.0 0.53 — — CW 4-4 1-1 3-3
201-2 Three 50/60 0-120 2.0 0.42 2.5 0.52 CW 2-1-2 1-1 3-1-3
Phase 120++ CCW 1-2-1 2-2 3-2-3 1 & 5 4 1/4 Open
Delta π 60 0-132 2.0 0.46 — — CW 4-1-4 1-1 3-1-3
Three CW 2-2-2 1-1-1 3-3-3 201-3 Phase 240++ 60 0-240 2.0 0.83 2.5 1.04
CCW 1-1-1 2-2-2 3-3-3
1 & 6 6 1/2
Wye π
Single 50/60 0-120 2.5 0.30 3.2 0.38 CW 1-2 — 1-3
221-B Phase 120 CCW 1-2 — 2-3 1 2 1/2
60 0-132 2.5 0.33 — — CW 1-4 — 1-3
Single 50/60 0-240 2.5 0.60 3.2 0.77 CW 2-2 1-1 3-3
Phase 240 CCW 1-1 2-2 3-3 1 & 4 5 1/2
Series 60 0-264 2.5 0.66 — — CW 4-4 1-1 3-3
221-B-2 Three CW 2-1-2 1-1 3-1-3
Phase 120++
50/60 0-120 2.5 0.52 3.2 0.67 CCW 1-2-1 2-2 3-2-3 1 & 5 5 1/2
Open
Delta π 60 0-132 2.5 0.57 — — CW 4-1-4 1-1 3-1-3
Three CW 2-2-2 1-1-1 3-3-3
221-B-3 Phase 240++ 60 0-240 2.5 1.04 3.2 1.33
CCW 1-1-1 2-2-2 3-3-3
1 & 6 8 1/4
Wye π
3PN221B
Single 120 60 0-132 2.50 0.33 — — CW LINE CORD & RECEPTACLE 3 3 Phase
Single 50/60 0-240 0.8 0.19 1.0 0.24 CW 1-2 — 1-3
252 Phase 240 CCW 1-2 — 2-3 1 2 1/2
60 0-264 0.8 0.21 — — CW 1-4 — 1-3
Single CW 2-2 1-1 3-3
Phase 480 50/60 0-480 0.8 0.38 1.0 0.48
CCW 1-1 2-2 3-3 1 & 4 5 1/2
Series 60 0-528 0.8 0.42 — — CW 4-4 1-1 3-3
252-2 Three 50/60 0-240 0.8 0.33 1.0 0.42 CW 2-1-2 1-1 3-1-3
Phase 240++ CCW 1-2-1 2-2 3-2-3
Open 60 0-264 0.8 0.37 — — CW 4-1-4 1-1 3-1-3
1 & 5 5 1/2
Delta π
Three 50/60 0-480 0.8 0.67 1.0 0.83 CW 2-2-2 1-1-1 3-3-3
252-3 Phase 480++ CCW 1-1-1 2-2-2 3-3-3 1 & 6 8 1/4
Wye π 60 0-528 0.8 0.73 — — CW 4-4-4 1-1-1 3-3-3
221-B
Single Unit
Two and Three Gang Units
View from
Base End
201-3
100/200 Series
INPUT OUTPUT TERMINAL CONNECTIONS
CONSTANT CONSTANT SHAFT
(For increasing Voltage)
PART NO. WIRING VOLTS HERTZ VOLTS CURRENT IMPEDANCE ROTATION
As Viewed from Base End
SCHE- NET
LOAD LOAD FOR MATIC WT.
MAX MAX MAX MAX VOLTAGE Input Jumper• Output (Pg 8 & 9) LBS.
AMPS KVA AMPS KVA INCREASE
Single 50/60 0-120 3.0 0.36 3.5 0.42 CW 1-2 — 1-3
291 Phase 120 CCW 1-2 — 2-3 1 2 1/2
60 0-132 3.0 0.40 — — CW 1-4 — 1-3
Single 50/60 0-240 3.0 0.72 3.5 0.84 CW 2-2 1-1 3-3
Phase 240 CCW 1-1 2-2 3-3 1 & 4 5 1/2
Series 60 0-264 3.0 0.79 — — CW 4-4 1-1 3-3
291-2 Three 50/60 0-120 3.0 0.62 3.5 0.73 CW 2-1-2 1-1 3-1-3
Phase 120++ CCW 1-2-1 2-2 3-2-3 Open 1 & 5 5 1/2
Delta π 60 0-132 3.0 0.69 — — CW 4-1-4 1-1 3-1-3
Three CW 2-2-2 1-1-1 3-3-3
291-3 Phase 240++ 60 0-240 3.0 1.25 3.5 1.45
CCW 1-1-1 2-2-2 3-3-3
1 & 6 8 1/4
Wye π
• Jumper provided in the standard common position and should be moved or removed as required.
++ Line to line voltage
π If ganged units are used in a system that ordinarily has a common neutral or ground between source and load, the neutral or ground must be connected to the common
terminals of the variable transformer assembly. If the system has no neutral, the load must be balanced or the transformers will be damaged.
120V 240V
TYPE B
171-2, 201-2 4.66” [118.3]
171-3, 201-3 7.38” [187.2]
221-B-2, 252-2 5.16” [131.0]
221-B-3, 252-3 8.12” [206.4]
291-2 5.59” [142.1]
291-3 8.81” [223.8]
TYPE A
171, 201 1.88” [47.6]
221-B, 252 2.12” [54.0]
291 2.31” [58.7]
源自：深圳市湾边贸易有限公司

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报

产品目录

产品资料

STACO 3PN1020 变压器STACO 171

STACO 3PN1020 变压器STACO 171, STACO 252变压器