首页 >>> 产品目录 >>> EMC测试仪
仪表展览网 >>> 展馆展区 >>> ESVD,EMI接收机^ESVD
> ESVD,EMI接收机^ESVD

产品资料

ESVD,EMI接收机^ESVD

ESVD,EMI接收机^ESVD
  • 如果您对该产品感兴趣的话,可以
  • 产品名称:ESVD,EMI接收机^ESVD
  • 产品型号:ESVD
  • 产品展商:罗德与施瓦茨 Rohde&Schwarz
  • 产品文档:无相关文档
简单介绍
ESVD,EMI接收机^ESVD 频谱分析仪,信号源,网络分析仪,示波器,综合测试仪,音频分析仪,电源,GPIB卡,衰减器,噪声系数分析仪,视频分析仪等
产品描述
ESVD,EMI接收机^ESVD
品 牌:德国罗德与施瓦茨 | R&S | Rohde&Schwarz

Rohde & Schwarz ESVD EMI Test Receiver, 20 MHz - 1 GHz (2 GHz)

The R&S ESVD Test Receiver is equally suitable for the measurement of signal strength and interference.

For planning and operation of mobile radio networks it is important to know the propagation conditions in the area to be covered. The ESVD Test Receiver features optimal bandwidths for mobile radio services as well as a high measurement rate so that it is ideal for fixed and mobile coverage measurements.

The number of measurements required to ensure electromagnetic compatibility is continuously increasing in the field of RFI measurements. Thanks to the built-in intelligence of Test Receiver ESVD, the time required for such measurements is reduced considerably. Being also a specialist for EMI measurements to CISPR, CENELEC, ETSI, FCC, VCCI and VDE standards, the ESVD can furnish results more rapidly and accurately than has been possible up to now.

The R&S ESVD Test Receiver for digital mobile radio networks is a triple-conversion heterodyne receiver covering the frequency range from 20 to 1000 MHz (2050 MHz optionally). Its main features and facilities are:

* RF attenuator switchable in 10-dB steps in the range 0 to 120 dB
* One preselector with fixed tuning and five tracking preselectors, option ESVD-B2 with four additional filters with fixed tuning
* Preamplifier with wide dynamic range, can be switched between preselector and 1st mixer
* Crystal-stabilized synthesizer as 1st LO, variable in 100-Hz steps, sweep mode for fast frequency scans; frequency accuracy complying with GSM recommendations
* High-level mixer ensuring high isolation of 1st LO for converting the input frequency to the first IF (1354.7 MHz or 394.7 MHz)
* High-level mixers for conversion to the second (74.7 MHz) and third (10.7 MHz) IF
* IF filters (10 kHz, 120 kHz, 300 kHz and 1 MHz) in the third IF stage with group-delay optimization
* Precise I/Q demodulator
* Highly linear envelope detector with more than 70 dB dynamic range
* Peak, average and quasi-peak detectors operating in parallel, which enables simultaneous measurements in different weighting modes
* Peak indication with IF bandwidth correction factors for measuring broadband interference (PK/MHz) automatically taken into account
* Measurement monitoring by means of automatic overload detection in the relevant ESVD stages and by the permanently activated peak detector
* Logarithmic amplifier with more than 70 dB dynamic range
* 12-bit A/D converter with short conversion time
* Measurement time selectable between 1 ms and 100 s
* Flash EPROMs allowing convenient and fast firmware updating with the aid of a PC
* Digital level indication on LC display and analog level indication on moving-coil meter taking into account transducer factors and their units
* Automatic calibration at a key-stroke with the aid of a high-precision built-in generator
* Demodulator circuits for FM, AM and A0; built-in loudspeaker and headphones connector
* Automatic monitoring of all synthesizer loops and supply voltages during operation
* Detection of faulty modules by built-in selftest facilities

Design
The service-friendly modular design of ESVD ensures excellent results regarding RFI emission and immunity. A quiet, temperature-controlled blower minimizes self-heating of ESVD. Comprehensive built-in test functions allow any module requiring servicing to be easily identified and replaced independently of other modules.

Functions
ESVD combines three classes of instruments in one:

* the system-compatible test receiver for GSM field-strength and EMI measurements
* the compact, manually tunable and battery-operated test receiver
* the automatic test receiver which performs EMI measurements and reports the results is equally suitable for the measurement of signal strength and interference.
产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!
  • 温馨提示:为规避购买风险,建议您在购买前务必确认供应商资质与产品质量。
  • 免责申明:以上内容为注册会员自行发布,若信息的真实性、合法性存在争议,平台将会监督协助处理,欢迎举报
产品留言
标题
内容
联系人
联系电话
电子邮件
公司名称
联系地址
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

粤公网安备 44030902000432号