Yokogawa Centum VP, Yokogawa DCS
Yokogawa Terminal Board AED5D
Standard Specifications
Model
Description
Points
Terminals
Modules
Connected
Connection
Cable
Weight
Specifications
AEA3D
For 2-wire Transmitter
(for single or dual redundant
modules)
8 pts x 4
M4 screws
AAI135
AAI835
AAP135
KS1
1.8 kg
Insulation resistance: 100
MΩ or greater at 500 V DC
Withstanding voltage: 500
V AC for 1 minute
AEA4D
For analog signals
8 pts x 2
1.5 kg
16 pts x 2
AAI141
AAV141
AAV142
AAV144
AAB841
AAI841
AAV542
AAV544
AAI143
AAI543
AET4D
For thermocouple
AAT145
AED5D
For digital signals
32 pts x 1
ADV151
ADV551
AKB331
ADV161 (*1)
ADV561 (*1)
AKB337
AEF9D
For fieldbus
4 ports x 4
ALF111
AKB336
AER4D
For resistance temperature
detectors
16 pts
AAR145
AKB335
MRT(*2)
KS8
AEC4D
ADV141
ADV142
ADR541
AKB332
AKB333
AKB334
Withstanding voltage:
Between commons;
1500 V AC for 1 minute,
common minus side
every 8-channel
Between signal and case;
2300 V AC for 1 minute
Note: Be sure to leave the connector caps on connectors that are not used, in order to protect the connector pins and prevent dust from accumulating on them.
*1: Two sets of AED5D or AKB337 are required for one set of ADV161 or ADV561. Yokogawa Terminal Board AED5D
*2: For details on the MRT, see GS 33K55R40-50E. Yokogawa Terminal Board AED5D
Model and Suffix Codes
Terminal Board for Digital(single and dual-redundant, 32-channel)
Suffix Codes
-0
Always 0
5
Basic Type with no explosion protection
6
With ISA Standard G3 option and no explosion protection
E
Basic type with explosion protection
F
With ISA Standard G3 option and explosion protection
Note: When the AED5D is used in voltage output mode, it does not conform to Non-Incendive standard. Yokogawa Terminal Board AED5D