英国莫伯雷Mobrey超音波液位傳訊器中文操作說明書(续二)
4. Press the yellow (ENTER) key to display the top-level of the menu system. The primary display re-appears automatically if there is no keypad activity for several minutes, if on-line. In addition, it re-appears when pressing the ESC key whilst at the top level of the menu system.
按黃色(ENTER)鍵到顯示上液位含有選單的系統。這*初的指示顯示陳列如果自動那是按鍵動作為幾分,如開啟-行。也陳列指示當要求這(ESC)鍵時間在那表面水位的選單系統。
5. Navigation of the menu system is achieved by using the ARROW keys, the ENTER key, and the ESC key. (See figure, right). The ESC key will return you to the previous menu level.
執行含有選單的系統是達到被使用箭頭(ARROW)鍵,這個ENTER鍵,和這ESC鍵。(看圖表,右側)。按ESC鍵將返回到*初的選單液位。
![](//zt.yzimgs.com/ComFolder/200116679/image/201901/201901231314816541.png)
6. The Main Menu sits above a series of sub-menus. Within the menus, there are also parameter screens for programming – setting up for an application, adjusting default settings, etc. – and for displaying information.
這主要選單位於上方連續往下選單。在範圍內選單,那也是參數螢幕為編制程序-設定向上為每一個應用程序,調整預設值設定,等。- 和為顯示資訊。
7. Programming the MCU901 unit is best achieved through easy-to-follow Wizards. They are simply a sequence of on-screen prompts, allowing you to easily set-up an individual function or a large application without fuss. There is a collection of Wizards for most functions and applications. They are all selected and started through the menu system. On the pages that follow, examples for several applications show how to use them.
這編制程序MCU901裝置是通過主機完成 容易-到-結果產生正常。它是一個簡單連續含有螢幕提示訊息,給與你蒐集為正常*大值功能和應用程式。全部用選擇和 全部用開啟這選單系統。開啟這記錄結果產生範例由各自應用程式顯示到它使用情況。
8. Additional features, such as password protection, resetting to factory defaults, etc., can found on pages 14/15.
附加特徵,前述密碼保護,重新開機到原廠預設,等。
Application/Duty: Level Measurement 運用/程式:液位量測
1. With power on and the MSP900SH transmitter giving a 4-20mA signal to the MCU901 unit (see previous pages), you can now programme the MS901 for an application. This application example is for level measurement.
與開啟電源和這MSP900SH感測器供給4-20mA信號到這MCU901裝置 (查看前頁)。現在可以運用MCU901程序表。這範例是關於液位測量。
Requirements 需求
Live level measurement in units of metres over a range of 0 to 11.7 metres.
低水位裝置在上方為公尺(m)測量範圍為0到11.7公尺(m)高水位警報 High level alarm.
Input Data 輸入資料
Tank Shape: Linear (e.g. Square) 水槽外形:直線 (e.g.正方形)
Bottom Reference: 12 metres底部參考:12公尺(m)
The MSP900SH transmitter is supplying the live level measurements in units of metres.
這MSP900SH感測器裝置是供給低水位測量設定為公尺(m)
2. Navigate the menu system to get to the “Duty Wizard” screen. Keypad hints are alongside the screens.
操作選項系統到收到〝運用功能〞螢幕。電腦鍵盤指示在旁邊的螢幕。
3. Start the “Duty” Wizard by pressing the yellow (ENTER) key once.
初啟這〝運用〞功能由黃色(ENTER)鍵按一次。
4. Work through the “Duty” Wizard prompts (see next page) until completion; this occurs when the menu system re-appears. Keypad hints, for the illustrated Wizard sequence on the next page, are provided alongside the prompts. If applicable, adapt the example to suit your application.
運作完成這〝運用〞功能提示訊息(查看下頁)直到完成時;出現這前選單系統版本-顯示。按鍵提示,為用圖��明功能連續在下一頁,是以側邊提示為條件,假如可應用,你合適的例子應用。
5. Circled numbers in the illustrated Wizard sequence relate to these notes:
運轉數值在說明功能有關連續這些註解:
① Select “Level” from the multiple-choice list. 從選擇〝液位〞多項-選擇目錄。
② Programme the 4-20mA output span with a level range (e.g. 0 to 11.7 metres)程序設計4-20mA輸出全長與液位範圍 (e.g. 0到11.7m)。
③ Set-up a high level alarm – the relay RL1 is energised whenever the measured level exceeds a pre-set level and de-energises below another pre-set level, as defined at these prompts.
設置高液位報警-RL1繼電器是測試每當量過液位超過一個預設液位和離開測試到另外前置液位下面,如同這些提示定義那樣。
④ Optional overrides to prevent individual relays from being energised for too little time or too much time.
非必須個別先做繼電器由於供給電源也在減少時間或增加時間。
⑤ Option to set-up further relays. 另外可選擇到向上設定繼電器。
6. Return to the main menu by holding the ESC key for a few seconds, releasing it when the main menu appears. Next, go on-line by selecting the “Go on-line” menu option and then pressing the ENTER key once. Finally, press the ESC key repeatedly until the primary display appears. The level measurement will be live on the primary display.
返回到主要選單按住ESC鍵為小數**,放開時那主要選單陳列,下一個,執行開啟-行經由選擇〝執行開啟-行〞選項可選擇所要按一次ENTER鍵。*後按ESC鍵重複按直到原始陳列顯示等。這水位測量將轉動到原始顯示。