CEDAR数显扭力扳手 DI-5M-RL02 东莞市必途仪器有限公司

查看大图

产品名称：CEDAR数显扭力扳手
产品型号：DI-5M-RL02
产品厂商：其它品牌
产品价格：0
折扣价格：0
产品文档：

你添加了1件商品查看购物车

简单介绍：

CEDAR数显扭力扳手It is compactly about a detection part.To management of bolting of a screw bolt.Bolting measurement of screw and bolt TORQUE CHECKER DI-5M seriesSeparate type merit!

详情介绍：

CEDAR数显扭力扳手
DI-5M-RL02
To measurement of the minute torque of 200 or less mN-m

Since the detection part was small and a light weight, minute
torque measurement which needs prudence for handling was enabled.

DI-5M-RL2
Measurement to 2N・m

It is easy to use measuring range widely

DI-5M-RL6
Measurement to 6 N・m

DI-5M-TW15
Torque measurement of a narrow place was also attained.

The maximum capacity 15 N-m
The minimum scale 0.01 N-m

(in addition -- Peak-Peak mode -- 0.15 N-m)

DI-5M-TW20
To the measurement of high torque to 20 N-m

NEW FUNCTIONS
(1) Preinstall "Real-time Output Mode" Which Outputs Load Torque Every
[ about 1 / 80] Seconds. A graph can be written with a personal computer.

(2)Display, Preservation, and Output about Maximum, Minimum, and Ave
rage of Measured Value
The main functions (DI-5M series)
- A maximum and minimum set torque O.K.!
Setting value is told with a buzzer and an LED lamp.
- A data memory is 300.
Data can carry out personal computer management with a RS232C output.
- It is a rechargeable battery drive and is convenience!
Furthermore, it is safe operation at auto-power-off.
- Tighting Counter!
The number of screw bundle is counted. Forgetting can be prevented.

性能参数

尺寸图

相关附件

Specification		DI-5M-RL02	DI-5M-RL2			DI-5M-RL6		DI-5M-TW15			DI-5M-TW20
Measuring range		1.5～200mN･m 0.015～2kgf・cm 0.015～1.8lbf・in	0.015～2N･m 0.15～20 kgf・cm 0.15～18lbf・in			0.15～6N･m 1.5～60kgf・cm 1.5～54lbf・in		0.15～15 N･m 1.5～150 kgf・cm 1.5～130 lbf・in			0.15～20N･m 1.5～200kgf・cm 1.5～180lbf・in
Accuracy		±0.5% (or less 199±1digit)
Display		The 3.5 figures digital display of LCD
The measurement direction		CW-CCW (right and left)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 80 second by RS232C.
Decision function	Setting of torque value	A top and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value		Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance		It is a display clearance in set-up time. (0.5 - 3.0 sec)
One-touch zero		A clear button is pushed and it is a zero. data output.
A setup of the number of counts		One to 99 count (count in a direction with a bundle)
Data spec.	Data transfer	Serial interface RS232C (Baud rate : 9600)
	Data memory	300 data stored
Power supply		Ni-Cd chargeable battery 1.2V×4cells 450mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		From empty - less than 4hours
Continues working time		10 hours
Meter outside type dimension		64(W) x104(D) x25 (H) (It does not contain by the projection thing.)
Weight		Meter part 208g
Bit/Socket part		Φ4		HEX 6.35			□　6.35			□　9.5
Accessories (one piece each)		Φ4 bits (＋)　♯0/♯1			6.35HEX bits (＋)　♯1/♯2				One-way socket
		Receipt case
		AC/DC adaptor (Please choose AC adaptor out of 120V, and 230V.)
		An inspection report, a proofreading certificate, a traceability system figure
* TW15 models of roller clutches are used. The one-way mechanism with sufficient efficiency with a return angle of 0 degree is attached. 　(at the time of a right-hand-thread bundle)

标题：

内容：

联系人：

联系电话：

Email：

公司名称：

联系地址：

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!

2.如有必要,请您留下您的详细联系方式!

产品名称：CEDAR数显扭力扳手