产品目录

当前位置：首页 >>> 成功案例 >

成功案例

金属制品的测试标准

金属制品的测试标准
标准号	描述
ASTM B598	This practice covers the determination of the yield strength (0.01%, 0.02%, and 0.05% offset), at room temperature. It is intended for copper alloys in tempers commonly used for spring applications, and materials thicker than 0.010 in. (0.25 mm).
ASTM E1012	This test method covers the determination of the bearing strength of rigid plastics in either sheet or molded form.
ASTM E209	This practice covers procedures, equipment, and specimens for compression tests on metallic materials.
ASTM E21	These test methods cover procedure and equipment for the determination of tensile strength, yield strength, elongation, and reduction of area of metallic materials at elevated temperatures.
ASTM E238	This test method covers a pin-type bearing test of metallic materials to determine bearing yield strength and bearing strength.
ASTM E292	These test methods cover the determination of the time for rupture of notched specimens under conditions of constant load and temperature. These test methods also includes the essential requirements for testing equipment.
ASTM E345	These test methods cover the tension testing of metallic foil at room temperature in thicknesses less than 0.006 in. (0.150 mm).
ASTM E8	These test methods cover the tension testing of metallic materials in any form at room temperature, specifically, the methods of determination of yield strength, yield point elongation, tensile strength, elongation, and reduction of area.
ASTM E9	These test methods cover the apparatus, specimens, and procedure for axial-load compression testing of metallic materials at room temperature.

BS 4A 4-1.2:1967	Specification for test pieces and test methods for metallic materials. Tensile tests. Tensile tests - elevated temperature. Metric units
BS 4A 4-1.3:1967	Specification for test pieces and test methods for metallic materials. Tensile tests. Uninterrupted creep and rupture tests. Metric units.
BS EN 10002-1:2001	Tensile testing of metallic materials. Method of test at ambient temperature.
BS EN 10002-5:1992	Tensile testing of metallic materials. Method of test at elevated temperatures.
BS EN 10319-1:2003	Metallic materials. Tensile stress relaxation testing. Procedure for testing machines.
BS EN 13523-7:2001	Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test).
BS EN 23312:1993, ISO 3312:1987	Sintered metal materials and hardmetals. Determination of Young's modulus.
BS EN 23327:1993, ISO 3327:1982	Hardmetals. Determination of transverse rupture strength.
BS EN ISO 7438:2000	Metallic materials. Bend test.
BS EN ISO 7500-1:2004	Metallic materials. Verification of static uniaxial testing machines. Tension/compression testing machines. Verification and calibration of the fo rce-measuring system
BS EN ISO 7622-2:1996	Steel cord conveyor belts. Longitudinal traction test. Measurement of tensile strength.
BS EN ISO 8491:2004	Metallic materials. Tube (in full section). Bend test.
BS EN ISO 8496:2004	Metallic materials. Tube. Ring tensile test.

EN ISO 7438	Metallic materials. Bend test.
ISO 10113	Metallic materials. Sheet and strip. Determination of plastic strain ratio.
ISO 10447	Resistance welding. Peel and chisel testing of resistance spot and projection welds.
ISO 1099	Metallic materials. Fatigue testing. Axial force controlled method.
ISO 3327	Hardmetals. Determination of transverse rupture strength.

上一篇:包装的测试标准
下一篇:医疗器械的测试标准

若网站内容侵犯到您的权益，请通过网站上的联系方式及时联系我们修改或删除