|
|
|
标准号
|
描述
|
|
ASTM D1388
|
This test method covers the measurement of stiffness properties of fabrics. Bending length is measured and flexural rigidity is calculated.
|
|
ASTM D1683
|
This test method measures the sewn seam strength in woven fabrics by applying a force perpendicular to the sewn seams.
|
|
ASTM D2061
|
These test methods cover the determination of the strengths for zipper and zipper parts.
|
|
ASTM D2136
|
Fabrics coated with rubber or rubber-like materials display increased stiffening when exposed to decreasing ambient temperatures. This test method describes a simple pass/fail procedure whereby material flexibility at a specified low temperature can be determined. Failure is indicative of unacceptability of the coated fabric for use at that temperature.
|
|
ASTM D2208
|
This test method covers the determination of the breaking strength of leather by the grab method. It is intended for use on light, soft leathers; boarded, sueded, or embossed leathers tested on a specimen in the form of a rectangle piece; narrow strap, welt, lace, and round belt leathers; or other leathers that cannot be accurately tested by Test Method D2209. This test method does not apply to wet blue.
|
|
ASTM D2209
|
This test method covers the determination of the load required to rupture a leather test specimen having a 1/2-in. (12.7-mm) width. The load to rupture divided by the original unstretched cross-sectional area gives the tensile strength. It may be used for all types of leather that are smooth and firm enough to permit accurate thickness measurements.
|
|
ASTM D2211
|
This test method covers the measurement of the elongation or stretch characteristics of leather produced by a tensile load.
|
|
ASTM D2212
|
This test method covers the determination of the slit tear resistance of light leathers such as shoe uppers, gloves, and upholstery.
|
|
ASTM D2213
|
This test method covers the determination of the compressibility of sole leather.
|
|
ASTM D2261
|
This test method covers the measurement of the tearing strength of textile fabrics by the tongue (single rip) procedure using a recording constant-rate-of-extension-type (CRE) tensile testing machine.
|
|
ASTM D2594
|
This test method covers the measurement of fabric stretch and fabric growth of knitted fabrics intended for applications requiring low-power stretch properties.
|
|
ASTM D3107
|
This test method covers the determination of the amount of fabric stretch, fabric growth, and fabric recovery of fabrics woven in whole or in part from stretch yarns after a specified tension and extension.
|
|
ASTM D4393
|
This test method covers the determination of peel adhesion of reinforcing fabrics that are bonded to rubber compounds. It is applicable to either woven or parallel cord textile structures from both natural and manmade fibers and to parallel steel cord structures.
|
|
ASTM D4704
|
This test method is intended for determining the tearing strength of leather by measuring the force required to tear a specimen cut perpendicular to the surface.
|
|
ASTM D4705
|
This test method is intended for use in determining the stitch tearing resistance of leather using a double hole tear. It is particularly applicable to lightweight leathers.
|
|
ASTM D4786
|
This test method is intended for determining the stitch-tearing strength of leather with a tear originating from one hole. It is particularly applicable to heavy leather.
|
|
ASTM D4831
|
This test method is intended for use on all types of leather to determine the load required to tear a leather strap fastened in a buckle.
|
|
ASTM D5034
|
This test method covers the grab and modified grab test procedures for determining the breaking strength and elongation of most textile fabrics. Provisions are made for wet testing.
|
|
ASTM D5035
|
This test method covers raveled strip and cut strip test procedures for determining the breaking force and elongation of most textile fabrics. Provision is made for wet testing.
|
|
ASTM D5170
|
This test method covers the measurement of the peel strength of hook and loop touch fasteners using a recording constant-rate-of-extension tensile testing machine (CRE).
|
|
ASTM D5587
|
This test method covers the measurement of the tearing strength of textile fabrics by the trapezoid procedure using a recording constant-rate-of-extension-type (CRE) tensile testing machine.
|
|
ASTM D5733
|
This test method covers the measurement of the tearing strength of nonwoven fabrics by the trapezoid procedure using a recording constant-rate-of-extension (CRE) tensile testing machine.
|
|
ASTM D5735
|
This test method covers the measurement of the tearing strength of nonwoven fabrics by the tongue (single rip) procedure using a recording constant-rate-of-extension (CRE) tensile testing machine.
|
|
ASTM D6077
|
This test method covers the measurement of the tearing load of nonwoven fabrics by the trapezoid method for leather.
|
|
ASTM D6571
|
This test method covers the measurement of compression resistance and recovery properties of any type of highloft nonwoven fabric using a simplistic and economical applied static weight loading technique.
|
|
ASTM D6614
|
This test method covers the determination of the amount of fabric stretch and fabric growth after a specified extension and held for a specified time.
|
|
ASTM D6644
|
This test method measures the resistance of the bridge of a sew-through button to a steadily increasing strain.
|
|
ASTM D6775
|
This test method covers the determination of the breaking strength and elongation of textile webbing, tape and braided materials using a split-drum type specimen clamp.
|
|
ASTM D6797
|
This test method describes the measurement for bursting strength of woven and knitted textiles taken from rolls of fabric or fabric taken from garments.
|
|
|
|
BS 3356:1990
|
Method for determination of bending length and flexural rigidity of fabrics.
|
|
BS 3424-5:1982
|
Testing coated fabrics. Methods 7A, 7B and 7C. Methods for determination of tear strength.
|
|
BS 4098:1975
|
Method for the determination of thickness, compression and recovery characteristics of textile floor coverings.
|
|
BS 6906-8:1991
|
Methods of test for geotextiles. Determination of sand-geotextile frictional behaviour by direct shear.
|
|
BS EN 12242:2000
|
Touch and close fasteners. Determination of peel strength.
|
|
BS EN 13542:2001
|
Manufactured articles filled with feather and down. Method for determining the compressibility index of clothing.
|
|
BS EN 13895:2003
|
Textiles. Monofilaments. Determination of tensile properties.
|
|
BS EN 1875-3:1998
|
Rubber and plastics-coated fabrics. Determination of tear strength. Trapezoidal method.
|
|
BS EN 1876-1:1998
|
Rubber- or plastics-coated fabrics. Low temperature tests. Bending test.
|
|
BS EN 1897:2001
|
Geotextiles and geotextile-related products. Determination of the compressive creep properties.
|
|
BS EN 29073-3:1992, ISO 9073-3:1992
|
Methods of test for nonwovens. Methods of test for nonwovens. Determination of tensile strength and elongation.
|
|
BS EN ISO 10319:1996, ISO 10319:1993
|
Geotextiles. Wide-width tensile test.
|
|
BS EN ISO 10321:1996, ISO 10321:1992
|
Geotextiles. Tensile test for joints/seams by wide-width method.
|
|
BS EN ISO 10618:2004
|
Carbon fibre. Determination of tensile properties of resin-impregnated yarn.
|
|
BS EN ISO 12957-2:2005
|
Geosynthetics. Determination of friction characteristics. Inclined plane test.
|
|
BS EN ISO 13431:1999
|
Geotextiles and geotextiles-related products. Determination of tensile creep and creep rupture behaviour.
|
|
BS EN ISO 13934-1:1999
|
Textiles. Tensile properties of fabrics. Determination of maximum force and elongation at maximum force using the strip method.
|
|
BS EN ISO 13934-2:1999
|
Textiles. Tensile properties of fabrics. Determination of maximum force using the grab method.
|
|
BS EN ISO 13935-1:1999
|
Textiles. Seam tensile properties of fabrics and made-up textile articles. Determination of maximum force to seam rupture using the strip method.
|
|
BS EN ISO 13935-2:1999
|
Textiles. Seam tensile properties of fabrics and made-up textile articles. Determination of maximum force to seam rupture using the grab method.
|
|
BS EN ISO 13937-2:2000
|
Textiles. Tear properties of fabrics. Determination of tear force of trouser-shaped test specimens (single tear method).
|
|
BS EN ISO 13937-3:2000
|
Textiles. Tear properties of fabrics. Determination of tear force of wing-shaped test specimens (single tear method).
|
|
BS EN ISO 13937-4:2000
|
Textiles. Tear properties of fabrics. Determination of tear force of tongue-shaped test specimens (double tear test).
|
|
BS EN ISO 14125:1998
|
Fibre-reinforced plastic composites. Determination of flexural properties.
|
|
BS EN ISO 1421:1998
|
Rubber-or plastics-coated fabrics. Determination of tensile strength and elongation at break.
|
|
BS EN ISO 2062:1995
|
Textiles. Yarns from packages. Determination of single-end breaking force and elongation at break.
|
|
BS EN ISO 252-1:1999
|
Textile conveyor belts. Adhesive strength between constitutive elements. Methods of test.
|
|
BS EN ISO 283-1:2000
|
Textile conveyor belts. Full thickness tensile testing. Determination of tensile strength, elongation at break and elongation at the reference load.
|
|
BS EN ISO 3376:2002
|
Leather. Physical and mechanical tests. Determination of tensile strength and percentage extension.
|
|
BS EN ISO 3377-1:2002
|
Leather. Physical and mechanical tests. Determination of tear load. Single edge tear.
|
|
BS EN ISO 3377-2:2002
|
Leather. Physical and mechanical tests. Determination of tear load. Double edge tear.
|
|
BS EN ISO 4674-1:2003
|
Rubber- or plastics-coated fabrics. Determination of tear resistance. Constant rate of tear methods.
|
|
BS EN ISO 505:2000
|
Conveyor belts. Method for the determination of the tear propagation resistance of textile conveyor belts.
|
|
BS EN ISO 5079:1996
|
Textiles. Fibres. Determination of breaking force and elongation at break of individual fibres.
|
|
BS EN ISO 9073-4:1997
|
Textiles. Test methods for nonwovens. Determination of tear resistance.
|
|
BS EN ISO 9073-7:1998
|
Textiles. Test methods for nonwovens. Determination of bending length.
|
|
BS ISO 3341:2000
|
Textile glass. Yarns. Determination of breaking force and breaking elongation.
|
|
BS ISO 3342:1995
|
Textile glass. Mats. Determination of tensile breaking force.
|
|
BS ISO 3597-2:2003
|
Textile-glass-reinforced plastics. Determination of mechanical properties on rods made of roving-reinforced resin. Determination of flexural strength.
|
|
BS ISO 3597-3:2003
|
Textile-glass-reinforced plastics. Determination of mechanical properties on rods made of roving-reinforced resin. Determination of compressive strength.
|
|
BS ISO 4606:1995
|
Textile glass. Woven fabric. Determination of tensile breaking force and elongation at break by the strip method.
|
|
EN 14689
|
Leather. Physical and mechanical tests. Determination of bagginess, creep and relaxation.
|
